Z-SC1

Process control

Freeze drying process:

Loading – Primary freezing – 1st drying process – 2nd drying sublimation process

Manual control:

Input conditions and parameters for the process from freeze to 1st / 2nd drying processes. Process is finished after checking completion of drying.

Automatic Control:

Select protocol. Parameters of Pre Freeze ~ 1st/2nd drying processes are automatically set up. Process is completed by P-rise test system inside of chamber after whole process is finished.

Recorder

Sample temperature 1,2,3 /shelf temperature/condenser temperature/vacuum level.

Drying chamber:

Cooling speed:

From 20ºC to -40ºC (1ºCmin) in less than 60 minutes.

Shelf Temperature Uniformity:

Less than +/- 1.5ºC

Vessel Pressure Standard:

Qualified chamber under vacuum gauge pressure lower than 5×10³ Torr

 

Cold Trap Chamber, Condenser

Cooling speed:

From 20ºC to -70ºC in less than 30 minutes.

Defrosting system:

Hot gas solenoid method. Fast defrosting by steam and hot water. Removes ice in less than 30 minutes.

Vacuum System

Pull Down Time:

From 760Torr to 100mTorr in less than 45 minutes. Lower than 20mTorr eventually.
  • All in one function, operates in minimal space
  • Pilot scale condenser capacity: 10~30 liters/batch
  • 0.6 ~ 2.0 m² various shelf area and distance (standard: 60mm)
  • Selectable shelf application (Bulk or Vial stoppering)
  • Shelf temperature range (-45ºC to 80ºC)
  • Selectable condenser temperature (-80ºC/ -120ºC)

 

 

CONTROL SYSTEM

7″ TFT LCD TOUCH SCREEN

LABORATORY FREEZE DRYER MAIN SCREEN

Main

Selection between Auto and manual mode. Alarms, Lamp, temperatures set up are displayed. Entire process time, shelf temperature, cold trap temperature, vacuum level are monitored. The whole process is visually monitored.

large scale freeze dryer -progress screen

Progress

Current status is being monitored. Any event must be recorded and reported. Program status is displayed.

large scale freeze dryer settings window

Settings

User can program their own protocol, saving each step and parameter as well as duration of run. Protocols can be saved and accessed anytime.

food industry freeze dryer-io-test

IO Test

Each compartment of equipment is tested by sending electric signal to monitorthe process and functionality

 

WiZBOX

Global Real Time Care Service

Remote Monitoring Service

Internet of things technology. 24/7 monitoring service by manufacturer’s server as well as user’s smart phone. Real time diagnosis and data collecting.

Proactive Service

Process data can be monitored all the time by smart phone application. Any incident shall be reported to authorized manager and service action can be instructed without visiting installation site. *App: OS Android 2.3 or latter, IOS 9.2 or latter

remote monitoring system freeze dryer

Command Room Data Monitoring

Temperature: sample, shelves, condenser, refrigeration system

Pressure: vacuum, chamber

Alarms: sensor failure, condenser overheat, over current, oil circulation failure, motor overheat, heater malfunction, condenser temperature error, vacuum failure, heat media circulation problem.

General Data: Process status including pre-freezing, vacuum status, 1st or 2nd drying process

twinfreeze freeze dryer wizbox

pilot scale freeze dryer accesories

research freeze dryer

get a quote twin freeze dryer

further questions - contact z-sc1 biomedical

Z-SC1 | Science and Beyond
©2017